Description

Lightolier Aperture 6-Inch Incandescent Non-IC 120V Frame-In Kit Recessed Ceiling Downlight Housing

Condition: New old stock / unused; may show minor cosmetic signs of shelf storage such as light dust, small surface marks, scuffs, or finish rubs. Original retail packaging is not specified and may not be included. Access above the ceiling is required for installation and service.

Detailed Description

The Lightolier Aperture 6-inch Incandescent Non-IC 120V Frame-In Kit is a recessed ceiling housing designed for hardwired incandescent downlight installations in residential, commercial, hospitality, retail, and institutional interiors.

This frame-in kit is intended for use in non-insulated or properly cleared ceiling cavities. The Non-IC designation means the housing must not be covered by or placed in direct contact with thermal insulation. Adequate clearance around the fixture is necessary to prevent heat buildup.

The unit operates from a 120V AC supply and is intended for incandescent recessed-lighting applications with a compatible 6-inch reflector, trim, socket, and lamp assembly. Because this style of frame-in housing requires service access from above, it is best suited to installations where an attic, plenum, removable ceiling, or other accessible ceiling space is available.

The junction box is designed to accommodate branch-circuit wiring and allows up to eight No. 12 AWG conductors, subject to the temperature requirements stated on the fixture.

Main Specifications

Specification	Details
Manufacturer	Lightolier
Product family	Aperture
Product type	Recessed frame-in kit / housing
Aperture size	6 inch
Lamp technology	Incandescent
Input voltage	120V AC
Frequency	AC line operation
IC rating	Non-IC
Installation type	Recessed ceiling
Ceiling access	Access above ceiling required
Power source	Hardwired
Branch wiring capacity	Maximum 8 No. 12 AWG conductors
Junction-box conductor rating	At least 75°C
End-of-run conductor rating	At least 60°C
Housing use	Dry or other approved ceiling construction, depending on exact model
Trim required	Yes, compatible 6-inch trim/reflector
Lamp included	Not specified
Trim included	Not specified
Socket/harness included	Depends on exact model and trim configuration
Condition	New, may show shelf-storage wear

Electrical Requirements

The fixture labeling specifies important conductor-temperature requirements:

• AC only
• Maximum of 8 No. 12 AWG branch-circuit conductors permitted in the junction box
• Conductors in the junction box must be rated for at least 75°C
• For an end-of-run installation, conductors suitable for at least 60°C may be used as indicated by the fixture labeling
• Installation should comply with applicable electrical codes
• Circuit power must be disconnected before installation or servicing

These ratings matter because recessed incandescent fixtures generate significant heat during operation.

Non-IC Requirement

This is a Non-IC recessed housing.

That means:

• Do not bury the fixture in thermal insulation
• Do not allow insulation to touch the housing
• Maintain the clearance required by the fixture labeling and applicable code
• Do not cover the housing in a way that traps heat
• Use only in ceiling cavities where the required air space can be maintained
• Do not substitute it for an IC-rated housing in a fully insulated ceiling

If the ceiling cavity is insulated and clearance cannot be maintained, an IC-rated recessed housing is the appropriate alternative.

Access Above Ceiling Required

One of the most important installation characteristics is that access above the ceiling is required.

This means the fixture is best suited to locations such as:

• Attics
• Accessible plenums
• Open joist ceilings during construction
• Removable ceiling systems
• Areas where ceiling panels can be removed
• New-construction applications before the ceiling is fully closed

It may be unsuitable for finished ceilings with no access from above unless the exact installation design specifically provides another approved service method.

Features

• 6-inch recessed aperture
• Designed for incandescent lighting
• 120V AC operation
• Non-IC construction
• Hardwired installation
• Branch-circuit capable junction box
• Capacity for up to eight No. 12 AWG conductors
• Suitable for multi-fixture branch-circuit layouts
• Intended for permanent ceiling installation
• Compatible with matching Lightolier trim components
• Architectural recessed-light appearance
• Suitable for general and accent illumination
• Robust metal frame-in construction
• Useful in new construction and accessible-ceiling applications
• Serviceable from above the ceiling
• Designed for professional electrical installation

Applications

Typical uses include:

• Residential living rooms
• Kitchens
• Dining rooms
• Hallways
• Entry areas
• Offices
• Conference rooms
• Retail stores
• Restaurants
• Hotels
• Lobbies
• Corridors
• Libraries
• Schools
• Galleries
• Reception areas
• Commercial interiors
• Institutional spaces
• New-construction ceiling systems

Lighting Applications

Depending on the selected trim and lamp, this housing can be used for:

• General ambient lighting
• Downlighting
• Accent illumination
• Task lighting
• Perimeter lighting
• Display lighting
• Hallway lighting
• Restaurant lighting
• Residential recessed lighting

The final beam shape and light distribution depend mainly on the selected reflector/trim and incandescent lamp.

Installation Considerations

Before installation, verify:

• Exact Lightolier catalog number
• Compatible 6-inch trim
• Correct lamp base
• Maximum lamp wattage
• Ceiling thickness
• Housing depth
• Available plenum space
• Accessibility above ceiling
• Insulation clearance
• Branch-circuit voltage
• Conductor insulation temperature rating
• Junction-box fill
• Grounding requirements
• Local electrical-code requirements

Junction Box Capacity

The junction box permits up to:

• 8 conductors
• No. 12 AWG
• Minimum 75°C conductor rating for through-branch circuit use

This makes the housing suitable for installations where several recessed fixtures are connected along one branch circuit, provided all applicable box-fill and code requirements are observed.

For an end-of-run connection, the label indicates that conductors suitable for at least 60°C are permitted.

Advantages

• Standard 6-inch recessed-light format
• 120V direct-wired operation
• Supports incandescent lamps
• Large junction-box conductor capacity
• Useful for through-wiring multiple fixtures
• Suitable for architectural lighting layouts
• Access above ceiling simplifies certain service operations
• Professional-grade frame-in design
• Compatible with interchangeable trim styles
• Useful for both residential and commercial projects

Limitations

• Non-IC rated
• Cannot be buried in insulation
• Requires access above the ceiling
• Incandescent technology uses more energy than modern LED systems
• Incandescent lamps generate substantial heat
• Exact trim and lamp compatibility must be confirmed
• Trim may be sold separately
• Lamp may be sold separately
• Not ideal for sealed finished ceilings without access
• Should not be installed where required insulation clearances cannot be maintained
• Requires qualified hardwired installation

Compatible Larger System

A complete recessed fixture installation normally requires:

• Lightolier Aperture 6-inch frame-in housing
• Compatible reflector or trim
• Correct socket or lamp holder
• Appropriate incandescent lamp
• 120V branch-circuit wiring
• Grounding conductor
• Ceiling opening
• Mounting supports
• Junction-box connections

Depending on the exact model, some of these components may be integrated while others are supplied with the trim.

Cross-Referenced Models

No exact Lightolier catalog number was provided, so a definitive direct cross-reference cannot be established.

Useful reference terms include:

• Lightolier Aperture 6 Inch Frame-In Kit
• Lightolier Aperture Non-IC Housing
• Lightolier 6″ Incandescent Recessed Housing
• Lightolier 120V Recessed Frame-In Kit
• Lightolier Non-IC Ceiling Housing
• Aperture 6 Inch Incandescent Downlight Housing

If the fixture label includes a model number, catalog number, wattage designation, or trim series, that information can be used to identify exact compatible reflectors and sockets.

Comparable Products

Comparable product families include:

• Lightolier Calculite 6-inch recessed housings
• Halo 6-inch non-IC recessed housings
• Juno 6-inch incandescent housings
• Lithonia Lighting 6-inch recessed fixtures
• Prescolite 6-inch architectural housings
• Cooper Lighting 6-inch recessed housings
• Commercial Electric 6-inch recessed housings

Important comparison points include:

• IC vs. Non-IC rating
• 120V compatibility
• Housing depth
• Ceiling access requirements
• Trim compatibility
• Lamp wattage
• Junction-box capacity
• Conductor temperature rating
• Damp-location rating
• Aperture diameter

Recommended Uses

This housing is particularly appropriate for:

• New construction
• Remodels with attic access
• Commercial suspended-ceiling spaces with service access
• Retail build-outs
• Restaurant lighting installations
• Hotel renovations
• Residential projects with open ceiling framing
• Replacement of older compatible Lightolier recessed systems

Related

Lightolier Aperture 6 inch, Lightolier recessed housing, 6 inch incandescent recessed light, non-IC frame-in kit, 120V recessed ceiling housing, architectural downlight housing, recessed can light frame, branch circuit recessed fixture, Lightolier ceiling downlight, 6 inch ceiling light housing, incandescent recessed fixture, hardwired recessed light, non-insulated ceiling housing, attic access recessed fixture, commercial recessed lighting frame, Lightolier old stock lighting

Common Requests:

1. Lightolier Aperture 6-inch incandescent Non-IC 120V recessed frame-in kit
2. New old stock Lightolier 6 inch recessed ceiling housing with shelf wear
3. Lightolier Non-IC recessed fixture requiring access above ceiling
4. 120V incandescent recessed downlight housing for No. 12 AWG branch wiring
5. Lightolier 6 inch architectural frame-in kit for accessible ceiling installation

Trademark Disclaimer

Lightolier®, Aperture®, Calculite®, Halo®, Juno®, Lithonia Lighting®, Prescolite®, Cooper Lighting®, and any other manufacturer or product names mentioned are trademarks or registered trademarks of their respective owners. They are used solely for identification, comparison, compatibility reference, and informational purposes and do not imply affiliation, sponsorship, authorization, or endorsement.